Osram KREIOS PAR 108W MFL 100-240V, Manual

Page: 12 / 19

KREIOS PAR KREIOS PAR
23 22
3 .3 .8 Scene Edit (EDIT)
Apply to Screenshot
KREIOS PAR 162W
KREIOS PAR 162W IP
(0~255)
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
Apply to Screenshot
KREIOS PAR 144W
KREIOS PAR 144W IP
(0~255)
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
Apply to Screenshot
KREIOS PAR 108W
(0~255)
(0~255)
(0~255)
(0~20)
(0~255)
(0~255)
• Select [EDIT] menu and press [ENTER], the LUM start generating signals automatically as master
controller
• Press [ENTER] to sub-menu or select data options,press [MENU] button to return to main menu
• Press [UP]/ [DOWN] to select program, scene or value (refer to “EDIT learning program”)
3 .3 .9 Local Equipment Setting (SET)
Apply to Screenshot
All Models
• Select [SET] menu and press [ENTER]; it quits “External Control Mode”
•
[UPLD] to submit self-defined data, press [ENTER] to confirm password, key-in the right password [UP,
DOWN, UP, DOWN] + [ENTER], light turns
yellow* which means delivering data, and upload progress
bar will display on the screen, light turns green after finished. Light turns yellow* when slaves receive
data, and turns green after finished. If light of slave remains yellow, it means failure when receiving
data, please cut off the slave and reload data from master.
(
*Note: for KREIOS PAR 162W/ KREIOS PAR 162W IP, the light color “yellow“ is actually green as
compensation .)
• [REST] is used to restore default settings, and press [ENTER] button for execution. Password: [UP,
DOWN, UP, DOWN] + [ENTER]
• [ID] is use to switch on/off ID address, press [ENTER] button, then press [UP]/ [DOWN] button, select
[ON] to permit ID address, [OFF] to shut down ID address
• [RGBW] is used to correct color shift, press [ENTER], and then press [UP]/[DOWN] button, select [ON]
to permit color shift correction,[OFF] to forbid. You can also set RGB proportion via [CAL2] menu
• [POW] is used to set power, press [ENTER],and then press [UP]/[DOWN] button to select [Normal] or
[High], [Normal=33%], [High=100%]
•
[DIM] is used to set non-linear dimming, press [UP]/[DOWN] button to select, [OFF] to close dim speed,
[DIM1] to speed 1(fastest), [DIM2] to speed 2, [DIM3] to speed 3, [DIM4] to speed 4(slowest),slower
speed create softer lighting effect
10502865 KREIOS PAR Indooroutdoor UI APAC OSRAMv5-draft.indd 22-23 2014/1/15 8:54:04