KREIOS PAR
KREIOS PAR
15
14
2
Product Brief
2 .1
Features
Four types of operating mode
External control Unit
–
DMX512 Lighting Console
(7 DMX channel modes are available for KREIOS PAR 162W/ KREIOS
PAR 162W IP/ KREIOS 144W/ KREIOS 144W IP, 5 DMX channel modes are available for KREIOS
108W)
–
Master/Slave
Self-defined Program
–
Powerful, useful, interesting software programming. Program without con- sole, fading, stepping,
strobing effect and random combination
–
Download program data between luminaires (master to slave)
Static Mold
–
Configure any color without console, and apply with strobe effect
Sound Active Mode
–
Including two commonly used mode
“Software Blackout”
–
Set the value of master DIM channel at 0 when executing internal program and self-defined program
under STAG mode (program run continually)
–
Difference from using “Hardware Blackout” such as “BLACKOUT” button: apply to individual (or
individual group of) luminaires only, avoid data clearance of console
ID Address Code
–
Individual control of luminaires of lighting group (maximum 66) with the same address code under
–
STAG mode (turn on, dynamic RGB, strobe, fade effect in sequence)
Non-linear Dimming and Linear Dimming
–
16-bit (60 thousand)
White Balance
–
Multi configurations with different color temperature
Color Shift Correction
–
Another description of “software controlled current”
Screen Saver
–
Go into screen saver mode without operation in 30 seconds, and press any key to exit screen saver
mode
Over-temperature Protection
–
Over temperature protection available
(Note: When temperature is at designated value, the controlling system will regulate the power
consumption to adjust the temperature until it’s balanced . The ranges of the temperature
adjustment will be different in different environments .)
2 .2
Quick Start Guide
Operation Mode Switch and Configuration
–
Any option displayed under main menu is defined as “external control mode”
•
Default setting for the equipment is “DMX512 console control” with the 4th decimal point flicker-
ing, which receives DMX512 signals only. If doesn’t, please check if it is correctly connected to the
console.
•
If you want to change DMX address code, please press the “MENU” button continually till “DMX”-
shown on the screen, then press “ENTER” to enter sub-menu
•
If you need to choose DMX channel mode, please press the “MENU” button continually till “PERS”
shown on the screen, then press “ENTER” to enter sub-menu
•
Five changing speed available, which decide softness of light changing ( “DIM” and 11th channel of
STAG mode under “SET” menu)
–
If you need to apply “Master/Slave Control”, please enter “RUN” menu and select “SLAV”, and then
signals from master controller can be received (or download self-defined program from master
controller).
–
Make sure that only one control unit connected (a master controller or a console): if multi signal
generators existing in the same channel, signals will interfere with each other and slave controller will
not receive data correctly.
–
Please enter “STAT” menu to switch to “Static Mode” (switch to master mode automatically).
–
Please enter “AUTO” menu to switch to “Auto-run Mode” (switch to master mode automatically).
–
Please enter “SOUD” menu to switch to “Sound Active Mode” (switch to master mode automatically).
10502865 KREIOS PAR Indooroutdoor UI APAC OSRAMv5-draft.indd 14-15
2014/1/15 8:53:57
