KREIOS PAR
KREIOS PAR
17
16
2 .3
Master Mode
Only under below 5 conditions, it can be a master controller to generate signals:
–
Enter “STAT” menu
–
Enter “AUTO” menu
–
Enter “SOUD” menu
–
Enter “EDIT” menu
–
Use “UPLD” to upload self-defined program under “SET” menu
2 .4
Synchronize Multi-controller
When control multi luminaires via console and apply strobe, auto run mode, the console is simply
used to generate channel data . Strobe and auto run effects are realized by individual luminaires .
Please note information below:
In practical use, unsynchronization can be caused by many reasons, such as different start time and con-
nection time to console. You can change the value of fader to fix them (e.g. adjust from 20 to 0 and back
to 20).
1. Due to crystal frequency deviation among different luminaires, unsynchronization will appear after a
long time running.
2. Two ways to keep synchronization during long time running:
a. Strobe and auto run effect under programmed console control
b. Under master/slave control mode
3
Method of Operation
3 .1
Push Button Operation
MENU ENTER UP
DOWN
3 .1 .1 Basic Operation
[MENU] Select main menu or return to previous menu
[ENTER] Enter or select sub-menu
[UP] Select menu or add value
[DOWN] Select menu or decrease value
3 .1 .2 Button Password
[UP, DOWN, UP, DOWN]+ [ENTER]
Press [UP], [DOWN], [UP], [DOWN] by turn,and press[ENTER] finally
3 .2
Menu structure
10502865 KREIOS PAR Indooroutdoor UI APAC OSRAMv5-draft.indd 16-17
2014/1/15 8:53:59
