Osram KREIOS PAR 108W MFL 100-240V, Manual

Page: 18 / 19

KREIOS PAR KREIOS PAR
35 34
• Fade in or fade out effect is created by different value of two adjacent scenes, and light effect can only
display correctly when program runs continuously.
• If “Time” equals 0,the scene will be skipped over. If “Fade Time” is larger than “Time”, then “Time” will
be fading time.
• You can set “Strobe” and “Fade Time” simultaneously.
• If not familiar, you can write down the program on paper sheet and then key into the LUM, run the
program, check the progress and make adjustment.
• To grasp EDIT function is not a hard job, try to begin with easy programs and then complex ones. You
can create various of magnificent effects by yourself, use them and enjoy them.
• If use “REST” under “SET” menu to return to default, edited program will not be cleared out.
Applicable for KREIOS PAR 144W/KREIOS PAR 144W IP products
Scene
R G B W ST T F Effect
SC.01 255 0 0 0 0 2 2 R fade in(for 2 seconds)
SC.02 0 0 0 0 0 2 2 R fade out
SC.03 0 255 0 0 0 4 2 G fade in(for 2 seconds),and remain 2
seconds
SC.04 0 0 0 0 0 4 2 G remain 2 seconds first,and fade out(for 2
seconds)
SC.05 0 255 255 0 0 2 2 GB fade in together(or green light fade in)
SC.06 0 0 255 0 0 2 2 G fade out,B remain
SC.07 255 0 0 0 0 2 2 R fade in, with B fade out
SC.08 255 0 0 0 0 1 0 R remain 1 second
SC.09 0 255 0 0 0 1 0 From R to G, G remain 1 second
SC.10 0 0 255 0 0 1 0 From G to B, B remain 1 second
SC.11 0 0 0 0 0 1 0 Shut down 1 second
SC.12 255 255 255 0 2 5 0 RGB strobe
... 0 0 0 0 0 0 0 Scene will be skipped over when time value
equals 0,until next scene which time value
unequal to 0. In this sample, program will
restart from scene 1.
Applicable for KREIOS PAR 108W products
Scene
R G B ST T F Effect
SC.01 255 0 0 0 2 2 R fade in(for 2 seconds)
SC.02 0 0 0 0 2 2 R fade out
SC.03 0 255 0 0 4 2 G fade in(for 2 seconds),and remain 2 seconds
SC.04 0 0 0 0 4 2 G remain 2 seconds first,and fade out(for 2
seconds)
SC.05 0 255 255 0 2 2 GB fade in together(or green light fade in)
SC.06 0 0 255 0 2 2 G fade out,B remain
SC.07 255 0 0 0 2 2 R fade in,with B fade out
SC.08 255 0 0 0 1 0 R remain 1 second
SC.09 0 255 0 0 1 0 From R to G, G remain 1 second
SC.10 0 0 255 0 1 0 From G to B, B remain 1 second
SC.11 0 0 0 0 1 0 Shut down 1 second
SC.12 255 255 255 2 5 0 RGB strobe
... 0 0 0 0 0 0 Scene will be skipped over when time value
equals 0,until next scene which time value
unequal to 0. In this sample, program will restart
from scene 1.
10502865 KREIOS PAR Indooroutdoor UI APAC OSRAMv5-draft.indd 34-35 2014/1/15 8:54:07