Page
39
of
59
CONFIGURING ENCODER FOR RTP
Return to the Web UI.
Select CH1, CH2 or CH3.
Ensure that the selected encoder shows a s
tatus of “STOPPED”
If necessary, click on the “Stop” button
Select the “Output” ribbon.
Set
“Output
Transport
” to “R
TP
.”
Set “Dest
Address” the IP address of the destination of the encoded stream.
Select the “Video” ribbon and select the Output Resolution, Codec and related settings. For
RTP you may use
H264(AVC) or H265(HEVC)
Select the “Audio” ribbon and select the Source, Codec a
nd Bitrate for the Audio. NOTE: You may select ONE
stereo pair from the available inputs. (SDI and HDMI expose 4 pairs each)
Select “START”
