Page
24
of
59
WIFI CONFIGURATION
The Wi-Fi on the Talon is an access point for configuration only. It will not support WiFi streaming. To access your
Talon, select the Access Point whose SSID is the same as the Serial Number. Once selected, use the password
“
0spr3yT@l0n
” to connect to the access point. In your browser, connect to the IP 10.
1.1.1 to reach the Web UI
and determine the IP address of your Talon. You can continue to use the access point to configure your encoders,
or you can use the IP address to connect with a browser from a PC. For complete instructions see the Talon Quick
Start Guide.
ACCESS POINT
The Talon Wi-Fi access point
is enabled by default. To turn off the Access Point, select “Disabled”
SSID
The SSID is “Talon
-
Pro” followed by the serial number of the Talon. You can distinguish multiple encoders in the
same vicinity by the serial number.
AUTHENTICATION
Authentication is turned on by default. If it is disabled anyone who tries to connect can do so without a password.
It is recommended that authentication always be enabled.
PASSWORD
The default password for WiFi
is
0spr3yT@l0n
This is the same for every Talon.
NOTE: FOR SECURITY, YOU SHOULD CHANGE THE PASSWORD AFTER FIRST SETUP.
