Section 2- Pre-Operation and Inspection
2
-
17
31211368
1.
Boom Sections and Lift, Tilt, Extend/Retract, Compensating Cylinders
-
• Check front, top, side and rear wear pads for presence of grease.
• Pivot pins secure; hydraulic hoses undamaged, not leaking.
2.
Left Outrigger (if equipped)
- Pins secure; hydraulic hoses and cylinder undamaged,
not leaking.
3.
Front Lights (if equipped)
- Clean and undamaged.
4.
Front Axle
- Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic
hoses undamaged, not leaking.
5.
Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
6.
Boom Prop (if equipped)
- See inspection note.
7.
Wheel Chock (if equipped)
- See inspection note.
8.
Mirrors
- Clean and undamaged.
9.
Cab and Electrical
-
• General appearance; no visible damage
• Frame level indicator(s) and window glass undamaged and clean
• Gauges, switches, joystick, foot controls and horn operational
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware
10.
Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
11.
Rear Axle Stabilizer Cylinder
- Pins secure; hydraulic hoses undamaged, not leaking.
12.
Rear Lights (if equipped)
- Clean and undamaged.
13.
Reversing Camera (if equipped)
- See inspection note.
14.
Reversing System (if equipped)
- See inspection note.
15.
Rear Lights (if equipped)
- Clean and undamaged.
16.
Rear Axle
- Steer cylinders undamaged, not leaking; pivot pins secure; hydraulic
hoses undamaged, not leaking.
17.
LSI Sensor (if equipped)
- See inspection note.
18.
Wheel/Tire Assembly
- Properly inflated and secured; no loose or missing lug nuts.
Inspect for worn tread, cuts, tears or other discrepancies.
https://www.forkliftpdfmanuals.com/
