Section 5- Attachments
5
-
37
31211368
To Side Tilt:
Press Auxiliary Electric Switch (
4
) on Right Control Panel to activate side tilt function.
Roller switch (
3
) controls carriage side tilt.
• Press roller switch down to (side) tilt right.
• Press roller switch up to (side) tilt left.
Installation Procedure:
Operation:
• Always lower forks fully in mast before engaging load.
• To drive with a load, lower forks fully in mast and travel in accordance with
requirements set forth in Section 1- General Safety Practices.
• Use a signal person to assist in positioning of load if necessary.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could damage forks
or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
WARNING
CRUSH HAZARD.
Do not use mast to push or pull objects or load. Failure to comply
could cause object or load to fall.
OD0530
OD0400
OD0880
OD0370
OD0390
2
3
1
4
https://www.forkliftpdfmanuals.com/
