Section 7- Lubrication and Maintenance
7
-
25
31211368
Note:
If utilizing the automatic transmission shifting feature, place the Transmission in (F)
Forward at 2nd gear.
9. Stall the transmission against service brake at full throttle a maximum of 60 seconds.
If transmission temperature icon illuminates, go to step 12.
10. Allow engine to run at idle for 30 seconds.
11. Repeat steps 9 and 10 three more times or until the transmission temperature icon
illuminates.
12. Place the transmission in (N) Neutral and apply the park brake. Allow the engine to
run at idle for 30 seconds.
13. Open engine cover.
14. Verify that top (
2
) of transmission oil cooler (
3
) is warm to determine that the bypass
valve (
4
) has closed and oil is circulating through the cooler. If the top of the
transmission oil cooler is not warm, repeat steps 6 thru 10.
15. Remove transmission dipstick (
1
) and check oil level. The oil level should be in the
HOT zone.
16. Add oil as required.
17. Replace transmission dipstick.
18. Close and secure engine cover.
19. Shut engine off.
https://www.forkliftpdfmanuals.com/
