![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-toucan-10e/jlg-toucan-10e_operation-and-safety-manual_1655759079.webp)
SECTION 3 – MACHINE CONTROLS, INDICATORS AND OPERATION
– JLG Lift –
3-37
Charger Interface
Status Bar
Display panel
Fault Error / USB Indicator
Solid red=Charge fault
See display panel for details
The
Charging Output Indicator
is solid yellow when
the charger output is active. Take appropriate
actions while handling the charger, as there is a risk
of electric shock.
Flashing amber= External error
condition - caution
See display panel for details
The
Charge Profile / Error Display
shows possible
codes to indicate different conditions:
- ‘F’ codes mean that an internal fault condition has
caused charging to stop.
- ’E’ codes mean that an external error condition has
caused charging to stop.
- ‘P’ codes mean that the charger programming
mode is active.‘
The ‘E,’ ‘F’ and ‘P’ codes are followed by three num
-
bers and a period to indicate different conditions
(e.g. E-0-0-4.). See the “Charger Fault Codes” or
“Charger Error Codes” sections for details on these
conditions and their solutions. ‘P’ codes indicate
the charging profile number.
Flashing green=USB port active
Solid green=Safe to remove USB
flash drive
AC Power Indicator
Solid blue=AC power available
Battery Charging Indicator
Flashing green=Low state of
charge
Solid green=High state of charge
Battery Charging Indicator
Flashing green=High state of
charge
Solid green=charge complete
The
Select Charge Profile Button
is used to select a
charge profile from those stored on the charger. Up
to 25 charge profiles can be stored. Press this but
-
ton to view the active charging profile.
Status Bar
Display Panel
To
order
go
to
Discount-Equipment.com