SECTION 3 – MACHINE CONTROLS, INDICATORS AND OPERATION
3-28
– JLG Lift–
3.9
OPERATION
1.
At ground control station, position the key-select
switch to PLATFORM.
2.
Position the emergency stop switch to the on (out)
position by turning it clockwise.
3.
At platform control station, position the emergency
stop switch to the on (out) position by turning it clock
-
wise.
NOTE:
If at any time during operation, the machine remains idle for a period exceed
-
ing 2 hours, machine power will be shut down. The emergency stop switch(es)
must be recycled to start machine again.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL
LEVERS OR SWITCHES CONTROLLING THE PLATFORM MOVEMENT DOES NOT
RETURN TO THE OFF OR NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN CONTROL LEVER OR THE ENABLE
BUTTON/TRIGGER SWITCH IS RELEASED, USE THE EMERGENCY STOP SWITCH
TO STOP THE MACHINE.
3.10 STEERING AND TRAVELLING (DRIVING)
DO NOT DRIVE WITH MAST OR JIB OUT OF TRANSPORT (STOWED) POSITION
EXCEPT ON A SMOOTH, FIRM AND LEVEL SURFACE FREE OF OBSTRUCTIONS
AND HOLES.
TO AVOID LOSS OF TRAVEL CONTROL OR "TIP OVER", DO NOT DRIVE MACHINE
ON GRADES OR SIDE SLOPES EXCEEDING THOSE SPECIFIED IN SECTION 5.
USE EXTREME CAUTION WHEN DRIVING IN REVERSE AND AT ALL TIMES
WHEN THE PLATFORM IS ELEVATED.
BEFORE DRIVING, LOCATE THE BLACK/WHITE ORIENTATION ARROWS ON
BOTH THE CHASSIS AND THE PLATFORM CONTROLS. MOVE THE DRIVE CON
-
TROLS IN A DIRECTION MATCHING THE DIRECTIONAL ARROW FOR THE
INTENDED DIRECTION OF TRAVEL.
To
order
go
to
Discount-Equipment.com
