![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-toucan-10e/jlg-toucan-10e_operation-and-safety-manual_1655759133.webp)
SECTION 5 – GENERAL SPECIFICATIONS AND MAINTENANCE
5-40
– JLG Lift–
Swing Bearing Teeth
Lube Points - Coat each tooth
Capacity: A/R
Lube - B (See Table 5-7)
Interval - Every 1000 hours of operation
1.
Remove chassis hoods.
2.
From ground control station, raise the mast to gain
access to the turntable plate.
3.
Remove
bearing teeth covers (1)
.
4.
Apply grease on teeth using a
brush (2)
.
Figure 5-24. Swing Bearing Teeth Lubrication
1
1
2
To
order
go
to
Discount-Equipment.com