![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-toucan-10e/jlg-toucan-10e_operation-and-safety-manual_1655759043.webp)
SECTION 3 – MACHINE CONTROLS, INDICATORS AND OPERATION
– JLG Lift –
3-1
SECTION 3. MACHINE CONTROLS, INDICATORS AND OPERATION
3.1
GENERAL
THE MANUFACTURER HAS NO DIRECT CONTROL OVER MACHINE
APPLICATION AND OPERATION, THE USER AND OPERATOR ARE
RESPONSIBLE FOR CONFORMING WITH GOOD SAFETY PRACTICES.
This section provides the necessary information needed to
understand controls and their functions.
DO NOT RAISE PLATFORM EXCEPT ON A SMOOTH, FIRM AND LEVEL SURFACE
FREE OF OBSTRUCTIONS AND HOLES.
TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINE IF ANY CONTROL
LEVERS OR TOGGLE SWITCHES CONTROLLING PLATFORM MOVEMENT DO NOT
RETURN TO THE OFF OR NEUTRAL POSITION WHEN RELEASED.
IF THE PLATFORM DOES NOT STOP WHEN A CONTROL SWITCH OR LEVER IS
RELEASED, USE THE EMERGENCY STOP SWITCH TO STOP THE MACHINE.
3.2
DESCRIPTION
This machine is a self-propelled hydraulic lift equipped with a
work platform on the end of an elevating and rotating mast.
The primary operator control station is in the platform and shall
only be accessed with the extending structure fully stowed. From
this control station, the operator can drive and steer the machine
in both forward and reverse directions. The operator can raise or
lower the mast and the jib, or swing the mast to the left or right.
Standard mast swing is 172.5 degrees left and right of the stowed
position. The machine has a Ground Control Station which will
override the Platform Control Station. Ground Controls operate
mast, jib and swing and are to be used in an emergency to lower
the platform to the ground should the operator in the platform
be unable to do so. The Ground Control is also to be used in Pre-
Start Inspection.
To
order
go
to
Discount-Equipment.com