![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-es1330l/jlg-es1330l_operation-and-safety-manual_1655774046.webp)
SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-14
31217186
Alarm
This alarm mounted on the front of the platform control station will
sound for various machine conditions or warnings such as system-
ready chirp or if the machine tilt warning is activated.
Battery Charge Indicator
The battery charge indicator displays the current
charge status of the onboard batteries.
•
Red LED flashing = batteries depleted
•
Red LED on solid = batteries low
•
Red LED on and green LEDs on =
batteries FULL charge
System Fault Indicator
When this indicator light
is flashing, a system fault
has occurred, possibly stopping machine opera
-
tion.
Check the MDI Indicator (if equipped) on the
Ground Control Station to see if a DTC is dis
-
played.
If the code cannot be cleared by the operator, the
machine will require service by a qualified JLG mechanic.
Indoor/Outdoor Operation Indicator
The Indoor (green) indicator and the Outdoor
(yellow) indicator displays the mode in which
the machine is currently set to operate.
NOTE:
In the Japan and AUS markets, ES1530L
is rated for INDOOR USE only.
Indoor/Outdoor Operation Mode Switch
This button will toggle between the Indoor/
Outdoor operation modes.
NOTE:
In the Japan and AUS markets, ES1530L
is rated for INDOOR USE only.
NOTE:
If the Indoor/Outdoor operation mode switch is activated on
machines with INDOOR ONLY functionality, the Indoor Opera
-
tion Indicator will flash and the machine will remain in indoor
mode.
Drive Speed Select Switch
The two-position speed switch controls high or
low range drive speed. Use high speed in unob
-
structed, open, flat, level work areas. Use low
speed in close work areas with obstacles, other
machinery, or personnel to avoid.
NOTE:
Drive speed automatically reduces to
low drive when the platform is raised
above the stowed position, regardless
of speed switch position.
Summary of Contents for JLG ES1330L
