Oshkosh Corporation JLG ES1330L, Operation And Safety Manual

Page: 20 / 98

SECTION 1 - SAFETY PRECAUTIONS
1-10
31217186
1.4 TOWING, LIFTING, AND HAULING
• Never allow personnel in platform while towing, lifting, or hauling.
• This machine should not be towed, except in the event of emer -
gency, malfunction, power failure, or loading/unloading. Refer to
Section 3.15 for emergency towing procedures.
• Ensure platform is fully retracted and completely empty of tools
prior to towing, lifting or hauling.
•
When lifting machine with a forklift, position forks only at desig -
nated areas of the machine. Lift with a forklift of adequate capac -
ity.
•
Refer to Section 3.14 for lifting information.
1.5 MAINTENANCE
This sub-section contains general safety precautions which must be
observed during maintenance of this machine. Additional precautions
to be observed during machine maintenance are inserted at the appro -
priate points in this manual and in the Service and Maintenance Man -
ual. It is of utmost importance that maintenance personnel pay strict
attention to these precautions to avoid possible injury to personnel or
damage to the machine or property. A maintenance program must be
established by a qualified person and must be followed to ensure that
the machine is safe.
Maintenance Hazards
•
Shut off power to all controls and ensure that all moving parts are
secured from inadvertent motion prior to performing any adjust -
ments or repairs.
•
Never work under an elevated platform until it has been fully low -
ered to the full down position, if possible, or otherwise supported
and restrained from movement with appropriate safety props,
blocking, or overhead supports.
• DO NOT attempt to repair or tighten any hydraulic hoses or fittings
while the machine is powered on or when the hydraulic system is
under pressure.