SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
2-4
31217186
2.3 PRE-START INSPECTION
The Pre-Start Inspection should include each of the following:
1. Cleanliness –
Check all surfaces for leakage (oil or battery
fluid) or foreign objects. Report this to the proper mainte
-
nance personnel.
2. Structure –
Inspect the machine structure for dents, dam
-
age, weld or parent metal cracks or other discrepancies.
Report this to the proper maintenance personnel.
3. Decals and Placards
–
Check all for cleanliness and legibil
-
ity. Ensure none of the decals and placards are missing.
Ensure all illegible decals and placards are cleaned or
replaced (refer to Section 6.6).
4. Operation and Safety Manuals
–
Ensure a copy of the
Operation and Safety Manual, AEM Safety Manual (ANSI
market only), and ANSI Manual of Responsibilities (ANSI
market only) is enclosed in the weather-resistant storage
container.
5. Walk-Around Inspection
–
Perform as instructed in Section
6. Battery –
Charge as required.
7. Hydraulic Oil Level
–
Check the hydraulic oil level in the
pump reservoir, add as required (refer to Section 6.5).
8. Accessories/Attachments –
Refer to the Accessories section
in this manual or the accessory installed upon the machine
for specific inspection, operation, and maintenance instruc
-
tions.
9. Function Check
–
Once the Walk-Around Inspection is com
-
plete, perform a functional check of all systems in an area
free of overhead and ground level obstructions. Refer to Sec
-
tion 3 for more specific instructions on the operation of each
function.
10. Platform Gate
–
Keep gate and surrounding area clean and
unobstructed. Verify the gate closes properly and is not bent
or damaged. Keep gate closed at all times except when
entering/exiting the platform and loading/unloading mate
-
rials.
11. Lanyard Attach Points
–
JLG Industries, Inc. recommends
personnel in the platform wear a full body harness with a
lanyard attached to an authorized lanyard attach point.
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE MACHINE IMMEDI
-
ATELY! REPORT THE PROBLEM TO THE PROPER MAINTENANCE PERSONNEL. DO NOT
OPERATE THE MACHINE UNTIL IT IS DECLARED SAFE FOR OPERATION.
.
Parent Metal Crack
Weld Crack
Summary of Contents for JLG ES1330L
