![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-es1330l/jlg-es1330l_operation-and-safety-manual_1655774039.webp)
SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
31217186
3-7
MDI Indicator (If Equipped)
The Multifunction Digital Indicator (MDI) displays a Battery Discharge
Indicator (BDI), a LCD display showing the current hourmeter reading, a
system distress LED, and Diagnostic Trouble Codes (DTC) when a func
-
tional problem occurs with the machine.
When a problem occurs and a DTC Code displayed:
•
A LED wrench icon (
1
) LED illuminates.
•
A three to five digit DTC code will display on the DTC LCD display
(
2
) below the wrench icon.
NOTE:
When more than one DTC exists, each DTC will be displayed on
the LCD for three seconds before changing to the next DTC. Once
the last active DTC is displayed, the display will recycle indefi
-
nitely until the DTCs are corrected. For DTCs and descriptions,
refer to Section 6.7.
Also located on the MDI are Battery Discharge Indicators (BDI) (
3, 4, 5)
.
The three green LEDs indicate the level of charge (voltage) remaining in
the batteries.
NOTE:
When the battery voltage is low and will need a charge soon, the
yellow LED (
4
) begin to flash.
BDIs and the hourmeter display under normal operating conditions.
When a DTC exists other than 00x DTCs, the BDI LEDs and hourmeter
are not be displayed. Additionally, when the platform is elevated and
the machine is driving in creep mode, the turtle icon is displayed.
1.
System Fault LED Indicator (Red LED)
2.
Hourmeter/DTC Code Display
3.
100% Battery Charge Indicator
(Green)
4.
Battery Charge Low Indicator (Yellow)
5.
Battery Re-Charge Indicator (Red)
Summary of Contents for JLG ES1330L
