OSEE PRM1014, User Manual, Page: 63 / 89

Functionality of the Main Menu
57
Use Cable1 to connect one of the CONTROL1/CONTROL2(RS422)
interface at the rear panel of TallyMan Controller with the RS485 Interface
of RMM1024, the functionality of the interfaces are as shown in the
following table.

RS485(RMM1024): RJ45
The definition of RS485 interface of RMM1024 is as the same as in
TSI-3000-RMM1024 system, please refer to the above
Table 5.1-13
for
the details, no repeat here.

RS422(TallyMan Controller): DB9
Use one of the
CONTROL1/CONTROL2
interface at the rear panel of
TallyMan Controller to connect with RMM1024 monitor, the
CONTROL1/CONTROL2
is a
RS422
interface using female DB9
connector, and the pins of DB9 is defined as in
Table 5.1-18
:
Table 5.1-18 The Pins of CONTROL1/CONTROL2 in TallyMan Controller
PIN No. DB9 Illustration
1 0v/Chassis
2 Tx-
3 Rx+
4 0v
5 -
6 0v
7 Tx+
8 Rx-
9 0v
The connection should obey the rules below to set up the communication
between one of
CONTROL1/CONTROL2
and RS485, as shown in
Table
5.1-19
:
Table 5.1-19 Connection Between CONTROL1/CONTROL2 of TallyMan
Controller and RS485 of RMM1024
DB9(CONTROL1/CONTROL2) RJ45(RS485)
2 5
3 6