OSEE PRM1014, User Manual, Page: 49 / 89

Functionality of the Main Menu
43

PBP
(Picture by Picture)
The two pictures generated by two input signals separately are
displayed side by side, and this function helps with white balance
adjustment, and determining shooting angles between two cameras etc.
In PBP mode, the size of the main picture is as large as the slave
picture’s, and the position relationship of the main picture and the slave
picture is as shown Figure 5.1-24:
Figure 5.1-24 PBP Mode
In PBP mode, it displays the WFM or Audio Meter only for the signal of
the current picture. The current picture is labeled by a triangle, as
shown in Figure 5.1-24, at the bottom center of the picture. You can
select the current picture by the
WIN SELECT
command assigned to a
function key.
In PBP mode, if you set
SUB IN SELECT
to be
WAVE FORM
, it
displays the WFM in the position of the slave picture which is displayed
paralleled as the slave picture, as shown in Figure 5.1-25:
Figure 5.1-25 The Slave Picture Is Displayed as WFM
(2) Set Display Mode
The selection for picture & picture display mode contains the following
items: OFF, PBP, PIP, you can switch the selection as instructed below:
 Method 1: By menu item.
Select the menu item
Config

SUB IN TYPE
, use
ENTER
,
UP
or
DOWN
key to select a display mode.