OSEE PRM1014, User Manual, Page: 25 / 89

PRM1014 Features
19
Pin 1 RED
Pin 2 GREEN
Pin 3~7 NC
Pin 8 GND
 Tally light is in working status when grounding.
9.
IN/ OUT RS485 Interface (RJ-45)
Support for dynamic UMD and updating the new firmware.
The Comparison of Pins and Input/output connectors for RS485 is
shown as in Table 4.2-2:
Table 4.2-2 The Comparison of Pins and Input/output connectors for
RS485
PIN No. RS485 IN Terminal Signal RS485 OUT Terminal Signal
1,2 GND GND
3 Tx- Tx-
4 Rx+ Rx+
5 Rx- Rx-
6 Tx+ Tx+
7,8 NC NC
10.
Power Input
It provides a 4-pins cannon power input interface, the specification is
5A12VDC. The corresponding indicator is at the front panel. If the light
is green, the monitor is powered on, if the light is flashing, the monitor is
standby, and if the light is off, the monitor is powered off.

Only use the adapter and the power cord specified by the manufacture for
your safety
！
Pin No. Channel Value