OSEE PRM1014, User Manual, Page: 13 / 89

Unpack and Installation
7
Chapter 3 Unpack and Installation
Unpack:
When unpacking the components of PRM1014 monitor, please verify that none
of the components listed in Table 3.1 are damaged or lack. If there is any
missing, contact your dealers or OSEE TECHNOLOGY CO., LTD. for it.
Table 3.1 Packing List
No. Item Quantity
1 Monitor 1
2 Power cord 1
3 Power adapter 1
4 Battery plate(optional) 1/2
5 User manual 1
6 warranty card 1
7 Certificate Card 1
Installation:
1.
Prepare for installation
Please follow the procedures below before installing PRM1014 monitor:

Check the equipment for any invisible damage that may have occurred
during transit.

Confirm all the items listed on the packing list have been received.

Remove all the packing material including electrostatic-resistant
packing.

Retain these packing for future use.
2.
Install PRM1014 in your desired location of an equipment rack.
Adequate ventilation is required when installed to prevent possible
damage to the PRM1014internal components.
There are screw holes at the center position of each surrounding sides,
which are labeled an arrow in the following figure, and there are foldable
mounts for support the monitor.