Americas, Ltd.
BCM-170 Series LCD Monitor
User Manual
3
Monitor
14.
Do not beat with a hard object or scratch the LCD display.
15.
Do not make the freeze picture displaying on the screen time too long, otherwise, it will leave
the afterimage on the screen.
16.
Install in accordance with the manufacturer’s instructions
17.
If the brightness is adjusted to the minimum, then it might be hard to see the display screen.
18.
Refer all servicing to qualified service personnel. Servicing will be required under all of the
following conditions:
Ø
The unit has been exposed to rain or moisture.
Ø
Liquid had been spilled or objects have fallen onto the unit.
Ø
The unit has been damaged in any way, such as when the power-supply cord or plug is
damaged.
Ø
The unit does not operate normally.
19.
Clean only with dry cloth.
20.
Specifications are subject to change without notice.
Chapter 3 Product Introduction
Unpackaging and installation
Opening the box, please check whether the device has been damaged during transport. Check all the
things listed on the packing list are received. If there is any missing, contact your distributors or Beijing
Osee Digital Technology Ltd. for it.
We recommend that you should save the packing materials for future needs.
1.
Install the pedestal following the iinstallation instructions.
Note: The pedestal and the monitor are packaged separately.
2.
Put the monitor on the position you need for installing, and connect the power. Please make sure the
place you put is safety.
3.
Connect a standard signal lines to the corresponding input port. All BNC connector impedance must
be 75
Ω
.
Note: Please use the power adapter supplied to avoid unnecessary trouble.
4.
Use the power adapter and cord to connect single-phase three-wire AC power or following the local
power supply conditions. Make sure the power cord grounding well.
5.
Finally, turn on the power switch, so that the device will be ready for work.
