OSD Audio 2600P series, Operator'S Manual

Page: 71 / 160

OPTICAL SYSTEMS DESIGN
DOC ID: 10112303
OSD2600 OPERATOR MANUAL
PAGE 71
Per port setting (include LAG):
1. GVRP: Click “GVRP” drop-down menu from “GVRP” drop-down list to choose “Enable” or
“Disable” to enable or disable GVRP for the port.
2. GVRP applicant: Click “GVRP applicant” drop-down menu from “GVRP applicant” drop-down
list to choose “Active” or “Normal” to the port. Ports in the GVRP active applicant state send
GVRP VLAN declarations when they are in the STP (Spanning Tree Protocol) blocking state,
which prevents the STP bridge protocol data units (BPDUs) from being pruned from the other
port. Ports in the GVRP normal applicant state do not declare GVRP VLANs when in the STP
blocking state.
3. GVRP registration: Click “GVRP registration” drop-down menu from “GVRP registration” drop-
down list to choose “Enable” or “Disable” to enable or disable GVRP registration to the port.
Configuring an IEEE802.1Q trunk port in registration mode allows dynamic creation (if dynamic
VLAN creation is enabled), registration, and deregistration of VLANs on the trunk port.
4. Update Setting: Click “Update Setting” button when you finished Per port setting.