OSD Audio 2600P series, Operator'S Manual

Page: 151 / 160

OPTICAL SYSTEMS DESIGN
DOC ID: 10112303
OSD2600 OPERATOR MANUAL
PAGE 151
IGMP passive snooping:
Report suppression:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)# prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2.
Usage:
Use ip igmp snooping report-suppression command to enable report suppression for IGMP versions
1 and 2.
Use the
no ip igmp snooping report-suppression command to disable report suppression.
3.
Command Syntax:
(no) ip igmp snooping report-suppression
4.
Example:
The following example enables report suppression for IGMPv2 reports on vlan1.1 :
switch_a(config)#interface vlan1.1
switch_a(config-if)#ip igmp version 2
switch_a(config-if)#ip igmp snooping report-suppression
switch_a(config-if)#
NTP
Adjust RTC Time:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)# prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use this command to specify system time to Switch.
3.
Command Syntax:
rtc adjust-system-time YEAR MONTH DAY HOUR MINUTE SECOND
YEAR <0-99> specifies year 2000 ~ 2099 to Switch.
MONTH <1-12> specifies January ~ December to Switch.
DAY <1-31> specifies day to Switch.
HOUR <0-23> specifies hour to Switch.
MINUTE <0-59> specifies minute to Switch.
SECOND <0-59> specifies second to Switch.
4.
Example:
The following example adjusts system time to Switch:
switch_a(config)#rtc adjust-system-time 2009 1 1 0 14 4
switch_a(config)#