- 17 -
EN
COMPONENTS OF THE CHILD CAR SEAT
Front view
Rear view
Adjustable
head support
Release lever for
Isofix connector
Armrest
Adjustment lever for
connector block /
resting position
Head section
adjustment
Insertion aids for Isofix
connectors
WARNING
•
Please read through these instructions carefully before use and keep them for subsequent
reference, in order to guarantee the safety of your child. Non-compliance with the instructions
in this manual may result in serious injuries to your child.
•
The child seat can only be used with the impact shield for children who weigh up to 18 kg
(Group 1).
•
The child seat CANNOT be used with the impact shield for children who weigh over
18 kg (Group 2/3).
•
For the Isofix installation: Be sure to read the car manufacturer’s manual.
•
Do not install the child car seat on the passenger seat if it has an active airbag. This could
result in death or serious injury. Before installing the seat on the passenger seat, ensure that
the airbag can be deactivated.
•
Do not use load bearing-contact points other than those described in the instructions and
marked in the child restraint system.
•
Do not use this child car seat at home. It has not been designed for use at home and should,
therefore, only be used in a car.
•
Do not leave your child unsupervised in the seat at any time.
•
The child seat should be replaced if it is exposed to heavy impact during an accident.
•
For safety reasons, the child car seat must be secured in the vehicle even when your child is
not sitting in the child car seat.
•
Always make sure that all belts that hold the seat holder to the vehicle are secure and that
all belts that restrain the child are adjusted to the child’s body. Please also ensure that the
belts are not twisted.
•
Items of luggage or other objects that could cause injury in the event of a collision must be
properly secured.
•
The rigid items and plastic parts of a child restraint system must be placed and installed so
that they cannot get caught by a movable seat or a vehicle door during everyday use.
•
It is important that low-lying belts hold the pelvis firmly in place. To avoid the risk of falling,
your child should always be strapped in.
•
It is dangerous to make changes or additions to the product without approval from the
responsible authority. Non-compliance with the installation instructions provided by the
manufacturer of the child restraint system is also associated with risks.
•
This child seat is designed for children weighing from 9 to 36 kg. Never overload the child
seat by transporting more than one child or additional loads in it.
•
The child restraint system must not be used without the seat cover.
•
The seat cover must not be replaced by a cover other than that recommended by the
manufacturer as this seat cover is an important component of the restraint performance.
Button for adjusting the
depth of the impact
shield
Belt guide pelvic
restraint (Group 2/3)
Belt guide
diagonal belt
Isofix
connector
Belt guide
Impact shield
Connector block
