TERMOLOGGER USB-THR
BUTTON OPERATION
LCD Mode
LCD always on
LCD on for 30
seconds
LCD off
LCD behaviour on button press
Each button press changes the LCD, as per the diagram
The first press enables the LCD and displays the last logged
temperature. Each subsequent press changes the LCD, as
per the diagram. If the button is not pressed for 30 seconds,
the LCD disables and the logger returns to the beginning of
the display cycle
‘Log’ is displayed, to show that the logger is working. No data
is displayed in this mode
Last logged
temperature reading
Highest logged
temperature reading
Highest logged
humidity reading
Lowest logged
humidity reading
Lowest logged
temperature reading
Last logged
humidity reading
The button performs 2 functions:
•
To start the logger when in ‘push to start’ mode
•
To enable the display and cycle through the
available display modes (see table below)
11
12
Summary of Contents for TERMOLOGGER USB-THR
Page 17: ......
