Green triple flash
Logger full, no alarm on the channel
Red triple flash
Logger full, alarm on the channel
Green double flash
Delayed start
Green single flash
Logging, no alarm
Red single flash
Logging, low alarm on the channel
Red double flash
Logging, high alarm on the channel
No LEDs flash
Logger stopped or battery empty
Green LED/Red
Maximum logged
value symbol
Negative
symbol
Minimum logged
value symbol
Relative Humidity
scale
The TERMOLOGGER USB-THR features a high contrast
LCD and two bi-colour LEDs. The LCD shows the latest
logged reading, maximum, minimum and supplementary
details on the logger status (see table opposite).
Temperature
scale
LCD Indicators
Reading
*If the logger is set to ‘LCD off’ or ‘LCD on for 30 seconds’ mode, then this will only be shown after
the button is pressed. Otherwise the display will remain blank.
Explanation
Logger status
Display
Delayed Start
Push to Start
Logging
Stopped
This is shown when the logger is set to
start at a specific date and time *
This is shown when the logger is setup for
‘push to start’ logging
This is shown when the logger is running
in ‘LCD off’ mode, and the button is
pressed. The display clears again after
three seconds
If the logger has not been set to log and
the button is pressed, three dashes are
displayed for three seconds
9
10
EN
LED
Indicators
TERMOLOGGER USB-THR
STATUS INDICATION
Summary of Contents for TERMOLOGGER USB-THR
Page 17: ......
