Orthoquad RZ1000, User Manual, Page: 6 / 28

Always drive carefully. Adjust your speed according to road conditions.
When turning at high speed, the RZ1000 can become unstable. Before
making sharp turns, reduce speed to minimum to prevent roll-over.
The RZ1000 is able to go up slopes higher than the recommended safe
slope. However, do not drive on slopes whose incline you do not know.
Always drive very slowly and do not drive on the side of such slopes.
Before starting to drive, make sure your emergency brake operates properly.
Do not release either the manual or the manual release lever of
the electromagnetic brake (EMB) when the RZ1000 is on a slope.
When on any sort of an incline, never place the
RZ1000
in freewheel mode
while seated on it or standing next to it.
The lights of the RZ1000 should be on when visibility is reduced,
day or night.
Since your seat upholstery is fire resistant, do not cover it or
replace with any upholstery other than upholstery of the same
kind.
When removing the battery cover, watch out for hot parts. The motor,
axle, EMB, electronic cards and electronic controller might be hot, Do not
touch them until you have checked their temperature.
Make sure your fingers are not squeezed between the levers and the
rubber grip.
Do not use a cell phone, walkie-talkie, laptop, or other radio transmitter while
operating the
RZ1000
.
Removal of the grounding prong can create electrical hazard. If it is
necessary to use a 2-pronged electrical outlet, properly install an approved
3-pronged adapter.
Do not connect an extension cord to the AC/DC converter or to the
battery charger.