Orthoquad RZ1000, User Manual, Page: 19 / 28

Throttle control
lever (#5)
To drive:
Gently squeeze the throttle control lever (depending on whether you
want to drive forward or backward) until you reach the desired
speed. Your speed is directly proportional to the deflection of the
throttle control lever.
Note:
You can squeeze one side of the throttle control lever towards you, or
you can push the other side away from you to achieve the same effect.
Use whichever method is most comfortable for you.
To stop :
Release the throttle control lever. The RZ1000 will stop gradually.
Turning buttons
(#6)
Hazard button
(#7)
Before you turn, press the applicable indicator button. When a turn
indicator is activated, the applicable LED will flash.
To turn off the indicator, press the button again.
The Hazard button activates the hazard lights (front and rear blinkers).
To turn off the hazard lights, press the button again.
Buzzer button
(#8)
Automatic
Freewheel switch
(#9)
To activate the buzzer, push the buzzer button.
Turn ignition key switch to ON then push the button to engage the
freewheel mode, push again for disengage the freewheel mode. This
function allowed moving scooter manually.
WARNING! Do not press the automatic freewheel button while
the RZ1000 is moving.
Button for
headlight and
rear lights
(#10)
To turn on the lights (headlight and rear lights), press the Lights button.
When the lights are on, the Light LED is lit. To
turn off the lights, press the button again.