ORTEC RADEAGLET, User Manual

Page: 14 / 60

Alarm and battery status LEDs are built into the keyboard of the RADEAGLET (Figure 1 , p. 9 , Figure 5 ,
p. 13 ).
G Gamma warnings and alarms
N Neutron warnings and alarms (optional)
Battery charging
Battery heat failure
2.3 Starting Up the RADEAGLET
1. Position the instrument in a low-radiation environment.
2. Position the supplied KCl (pottasium chloride) box in front of the detector cap.
3. Press and hold down the I key (Figure 5 , p. 13 ) at the bottom center of the keyboard.
4. After a couple of seconds the instrument begins to boot when the alarm LEDs (Figure 1 , p. 9 ) begin
to flash.
5. You a welcomed by the start-up screen (Figure 6 , p. 14 ).
Boot Progress
Current Date
Software Version
Figure 6: Starting the RADEAGLET.
6. The RADEAGLET performs an initial stabilization (see B.1 , p. 49 for details) and switches to DOSE
RATE MODE (Figure 9 , p. 17 ).
7. Watch the stabilzation status icon at the screen’s upper left:
Page 14 of 60 RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 © innoRIID GmbH