ORTEC RADEAGLET, User Manual

Page: 13 / 60

2 Using the RADEAGLET
Before you start the RADEAGLET for the first time, ensure the battery is fully charged. To check
this, plug in the provided charger (Figure
4 , p. 11 ) and let it charge until the green LED (Figure 1 ,
p. 9 ) goes off.
2.1 Battery Handling and Charging
The RADEAGLET has a built-in Li-ion battery which is charged when the instrument is connected via the
USB plug at the rear end. For charging, you can connect to a computer, a wall power adaptor, or an
external battery pack with a USB-A plug.
2.2 The RADEAGLET User Interface
The display of the RADEAGLET screen always shows status information along the top and the legend for
the keyboard along the bottom (Figure
1 , p. 9 , Figure 5 , p. 13 ). Pressing a key will launch the displayed
command or navigate to another display.
Legend of Keyboard
Functions
Figure 5: The current functions of keys is always shown along the bottom of the RADEAGLET display.
© innoRIID GmbH RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 Page 13 of 60