Ormec MotionBASIC, Software Manual

Page: 15 / 41

MotionBASIC
TM
Error Handler Configuring The Module
1. 55 / 3 = 18.33
2. Round DOWN to the nearest whole number = 18
3. 18 - 2 = 16
The first name in the list will refer to the first axis in the required axes set, the
second the next in the set and so on.
NOTE...... Some of the comments in the ERR.DATA block have a double tick, i.e.
’’
.
The double tick tells MotionPRO
TM
not to download the comment to the
controller. This saves a considerable amount of memory. If you need to refer
to the information that is in the comment, load the MBTOOLS.HYP file into the
Hypertext On-Line Help system. The information will be displayed if you press
ALT-? with the cursor located on ERR.DATA:
CAUTION...... Use caution when saving ERRMENU.BAS from the controller, the downloaded
version has the "double tick" comments removed. If uploaded with the same
file name, it will over-write the original version stored in your PC and these
comments will be gone forever. For this reason, we recommend that all editing
work on MBTools be done in the MotionPRO
TM
off-line editor.
GN3-ERRb page 7