37
PREPARATION/STATUS DISPLAY OF DISC
NOTE:
If the unit does not operate properly:
Static electricity can adversely affect the
operation of this player. Sometimes this
can be remedied by unplugging the unit
for a short time, then reconnecting it.
DVD
Audio CD
To make status display disappear, press
DISPLAY
again.
Status display of disc
Press
DISPLAY
twice. The status display of the disc will appear
on the screen during playback.
• When you play the CD disc, the status display will appear
on the screen and continue displaying.
Preparation
Before DVD/CD operation, please make preparations as follows.
1
2
3
Insert the AC cord plug into a standard 240V 50Hz AC outlet.
• If the AC cord plug is plugged in for the first time, wait for
about 5 seconds before pressing POWER
(ON)
on the
front.
NOTE:
When connecting to other equipment, unplug the unit
from the AC outlet.
Press
Sub Power
(
)
on the unit or on the remote control to
turn on the unit.
• Every time you press
Sub Power (
)
, the unit starts from
TV mode.
• When using an amplifier, switch on the amplifier.
Press
DVD
to select DVD mode.
The DVD startup screen will ap-
pear on the screen.
The following pages describe the
setup/operation in DVD mode.
34:56
71:33
Track 11/99
Disc operation
Track number
Track total time
Track elapsed playing time
Disc operation
00:34:56 01:12:33
1/9
Title
1/99
1/8
1/32
Chapter 1/999
Eng Dolby Digital
Eng
Title number
Chapter number
Title elapsed playing time
Title total time
Camera angle
Type of audio
Subtitle language
Audio language
No Disc
