20
LOADING AND UNLOADING THE VIDEO CASSETTE TAPE
Use only video cassette tapes marked .
Preparation:
Press
TV/VCR
to select TV/VCR mode.
PAL SECAM
Push the centre of the tape until it is automatically inserted.
AUTOMATIC POWER ON AND PLAY
(Make sure that the MAIN POWER switch is pushed in.)
When loading a cassette tape without the erase prevention tab intact, the unit will turn on and playback will
start immediately.
Insert the cassette with its labelled side facing you.
An inverted cassette cannot be inserted.
LOADING
UNLOADING
To unload a video cassette, press
EJECT
on the
remote control, or press the
(STOP/EJECT)
button on the unit twice. The first press will stop
the tape in any mode. The second press will
eject the tape.
Pull the cassette out.
AUTOMATIC EJECT
When the unit is automatically rewinding the tape and
reaches its end (AUTO REWIND), the tape will be ejected
automatically (See NOTE on page 24).
1
2
NOTES:
•
Always eject the tape when not in use.
•
The cassette can be ejected even if the ON (
) button is OFF.
TO PREVENT ACCIDENTAL ERASURE
TO RECORD AGAIN
After recording, break off the erase prevention tab if
you do not wish to record over the tape.
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of
the cassette housing.
Screwdriver
Erase prevention tab
Adhesive tape
TAPE SPEED AND MAXIMUM RECORDING/PLAYBACK TIME
VIDEO CASSETTE TAPE
LP (Long Play)
TAPE SPEED
SP (Standard Play )
E-30
30 minutes
1 hour
1 hour
2 hours
E-60
E-90
1-1/2 hours
3 hours
E-180
3 hours
6 hours
4 hours
8 hours
E-240
5 hours
10 hours
E-300
