24
RECORDING A TV PROGRAMME
1
To turn “ON” the TV/VCR, press
Sub Power
(
).
Press
TV/VCR
to select TV/VCR mode.
Load a cassette tape with the
erase prevention tab intact.
2
Press
SP/LP
to select the desired tape speed SP or LP.
3
Press
Direct channel selection
or
CH +
or
–
to select the
channel to be recorded (Exam-
ple: Channel 2).
4
5
Press
REC/OTR
.
“ ” and the channel number will
appear on the screen and the REC/
OTR indicator will light.
NOTES:
•
If the power is switched off during re-
cording, the TV section shuts off and the
VCR section continues to record.
•
The selected channel cannot be
changed during recording.
•
If you try to change the channel while
a recording is being made,
“RECORDING IN PROGRESS” will
appear on the TV screen for approx.
4 seconds.
•
AUTO REWIND FEATURE:
This unit will automatically rewind and
eject the tape when the tape has ended
(except during OTR and TIMER REC).
•
If the erase prevention tab has been
removed, the tape will eject when
REC/OTR
is pressed.
•
Although you cannot change the chan-
nel while the unit is recording, you can
still switch to DVD mode and watch a
DVD without affecting the recording.
RECORDING AND VIEWING THE SAME TV PRO-
GRAMME
TO STOP RECORDING TEMPORARILY
Press
PAUSE/STILL
to stop recording of unwanted
material. “ ” will appear on the screen and the REC/
OTR indicator will blink on and off.
Press again to continue the recording.
To prevent damage to the video head and video tape the
pause function will stop the VCR operation after about 5
minutes.
NOTE:
TO STOP RECORDING
Press
STOP
to stop recording.
“ ” will appear on the screen.
REC/OTR
CH 2
CH 2
INDEX
REC/OTR
CH 2
