32
DUPLICATING A VIDEO TAPE
If you connect the unit to another VCR or VIDEO CAMERA, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
CONNECTION TO CAMCORDER
CONNECTION TO ANOTHER VCR
For duplicating a previously recorded tape from a camcorder,
follow the camcorder manufacturer’s instructions. A typical
camcorder dubbing hookup is shown below.
1
Load a blank cassette tape with the erase prevention
tab intact into the unit (these instructions show how
to use this unit as the recording, rather than the
playback device).
Load a previously recorded tape into the playback
VCR or VIDEO CAMERA.
2
Press
REC
/
OTR
on the remote control of the unit,
then press
PAUSE
/
STILL
.
3
Press the
PLAY button on the playback VCR, then
press the PAUSE button.
4
Release the Recording Pause and Still Playback to
begin the duplicating process.
5
NOTES:
•
It is recommended that the tape speed be set to the SP mode on the unit for best results.
•
Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe
the rights of copyright owners and be contrary to copyright laws.
To AV Jack
AUDIO/
VIDEO lead
(not supplied)
Recording unit
Playback
Camcorder
Playback VCR
Recording unit
21 pin SCART/PERITEL lead
(not supplied)
TO AUDIO(R) IN
TO VIDEO IN
TO AUDIO(L) IN
Depending on the device that you are recording from,
you can use either the SCART socket at the rear or
the Front AV Input sockets. Press the AV button once
until “AV1” appears for recording through the SCART
socket or twice until “AV2” appears for recording
through the Front AV Inputs.
