PROFESSIONAL
SuRvEILLANcE SYSTEM
cPIn002660
13
eight channel digital video recorder
SC184
17 alarm > aBnormality
Abnormality refers to any deviation from the DVR’s normal
operation. This function notifies users when any abnormality
occurs.
›
eVenT Type:
There are five event types.
>
no Disk:
Hard drive not installed in DVR.
>
Disk error:
Error occured when read/write hard drive.
>
Disk no space:
No storage space in hard drive.
>
neT DisconnecTion:
Network connection interrupted.
>
ip conFlicT:
DVR IP address conflicting with other device.
›
enable:
Check this box to enable selected abnormality
detection.
›
shoW Message:
Pop up message on live monitoring
screen when abnormaility detected.
›
buzzer:
DVR emits an alarm tone using its internal buzzer
when abnormality detected.
18 system > general
General menu allows configuration of basic system settings.
›
sysTeM TiMe:
This is the date and time that is used to time
stamp all the video footages, logs and notifications.
›
DaTe ForMaT:
Select preferred date format.
›
DsT:
Daylight savings time is used to reconfigure the time
during daylight savings. Daylight savings differ from country
to country. Enter the dates and times that daylight savings
time applies begins and ends according to locality.
›
DaTe separaTor:
Select preferred separator (/ : .)
›
TiMe ForMaT:
Select preferred time format.
(24 hours or 12 hours)
›
language:
Select preferred language.
›
hDD Full:
The method the DVR handles data storage
when hard disk is full.
Overwrite
setting overwrites the oldest
recordings with new ones.
Stop
record setting stops all
recording when hard disk is full.
›
DVr no.:
Number allocated to the DVR. Multiple DVR can
share the same remote controller. Only when the matching
number of the DVR and remote control is pressed, the
remote control signals will be recognised by the DVR.
›
ViDeo sTanDarD:
Select video standard (PAL or NTSC).
The video standard in Australia is
PAL
.
›
auTo logouT:
Duration of inactivity to logout the
current user. After auto logout, the user is required to enter
password to resume operation.
