background image

28

1

Press SETUP in the stop mode.

Press

or

to select

“Parental”.

Then press 

 or ENTER.

2

Press 

 once to select “Parental Off”, then press

ENTER until the level you desire appears (e.g.: 1).

3

Press 

 once to select “Password 

”.

Then press Number keys to input a 4-digit password
(e.g.: 1234).
• If you input a wrong number, press CANCEL.
• Be sure to remember this number!

4

Press ENTER.

1234

 change to 

 .

Parental control setting

Some discs are specified not suitable for children. Such
discs can be prevented from play back with the unit.

Level Off

The parental control setting does not

function.

Level 1

DVD software for adults cannot be

played back.

Level 8

All DVD software can be played back.

Select from level 1 to level 8.
On a scale of 1-8, “1” is the most restrictive.

Password
Parental

Off

0 9/Cancel

/Enter/Setup/Return

Language Picture

Parental

Sound

Other

5

To make SETUP screen disappear, press SETUP.

1

Select “Password 

(step 2) and press Number
keys
 to input your 4-digit
password.
Then press ENTER.

To unlock the Parental control setting

2

If the input password was right, 

 will appear.

You can move to “Parental 1” (e.g.) to input the desired
level or to cancel parental control.

Password
Parental

1

/Enter/Setup/Return

0 9/Cancel

1234

Language Picture

Parental

Sound

Other

Cancel the password so as to set the Parental level freely
again,

NOTES:
• If each setup (pages 23, 28 ~ 30) has been   completed,

the unit can always be worked under the same
conditions (especially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.

• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating level

information though its disc jacket says “adult”. For those
discs, the age restriction will not work.

• Do not forget the password. If you forget the password,

contact customer service.

NOTE:
This temporary cancellation of rating level will be kept until
the disc is ejected.
When the disc is ejected, the original rating level will be set
again automatically.

Depending on the DVD disc, the disc may try to
temporarily cancel the rating level that you have set.
It is up to you to decide whether to cancel the rating
level or not.

If you wish to cancel the set rating level temporarily,

select “Parental Control Level” with 

 or 

, then

press ENTER. If the 4-digits password at step 3 on left
column has been set, the password entering screen will
appear as shown in step 4 below.
Alternatively, if the password has not been set, playback
will commence. If you don’t know (or have forgotten) the
password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/CLOSE
to remove the disc.

1

Load a DVD disc and press PLAY or OPEN/CLOSE (see
page 24).

2

If the DVD disc has
been designed to
temporarily cancel the
Rating level, the screen
which follows the
“Reading” screen will
change, depending on
which disc is played. If
you select “YES” with
ENTER key, “Your disc exceeds the parental control level
1.” (e.g.) screen will then appear.

3

Enter the password
with Number keys.
Then press ENTER.

4

Playback will commence if the entered password was
correct.

5

If you interrupt the
entering, press
RETURN.

Your disc exceeds
the parental control level 1.

Parental Control Level
Cancel Picture

/Enter/Return

Please enter the
4

digit password

9/Cancel/Return

Enter/0

Temporary disabling of rating level
by DVD disc

 

Parental control

Advanced function of DVD section

 2E50401A[E](28-BACK)

9/1/04, 10:06

28

Summary of Contents for SANSUI VRDVD4001AC





































Reviews: