46
OPM-4240 / OPM-4240R
47
Infinitely Expandable
MF-Controller configuration method
1. Connect power.
2. Connect female D-sub to the Com port in a computer.
3. Connect male D-sub to the RS-232C port in MPDP.
4. Set the number of the connected MPDP units in advance. The number can be set only by the Remote
controller.
5. Set the switch at REMOCON side
DC 5~9V
BOOSTER
REMOCON
TO PDP
FROM PC
아답터 연결잭
(5V 1A 사용)
MPDP연결
PC연결
BOOSTER 또는 REMOCON 선택 스위치
※note
Select BOOSTER for a booster and BIC functions.
Select REMOCON for a remote controller and BIC functions.
DC 5~9V
BOOSTER
REMOCON
TO PDP
FROM PC
BOOSTER
REMOCON
6. Start with press "GO" button.
7. Configure the number of horizontally installed MPDP units at first.
Press "LEFT" and "RIGHT" buttons to begin horizontal configuration. (◀ ▶)
Press the button for the number of the MPDP units and the same number of LEDs are turned on from
the right side. (In case of 2X2, press
button.)
2sets are selected.
Horizontal & Vertical
configuration
The LEDs are turned on one by one from the
rightmost as the number increases from 1 to
7 and turned off from the rightmost for the
number 8 or higher.
Horizontal configuration
7sets
Horizontal configuration
8sets
Horizontal configuration
10sets
가로설정상태
설정상태 나타냄
POWER ON POWER OFF
INPUT SELECT
PC
DVD
AUTO
R
G
B
W
GO
VIDEO S-VIDEO
DVI
DTV BROAD CAST
NORMAL
COMMAND
TEST PATTERN
PDP
REMOTE CONTROL
MPDP
Enter
S1
S2
S3
S4
S5
S6
S7
SCR
R
G
B
W
S1
S2
S3
S4
S5
S6
S7
SCR
1
2
3
4
5
6
7
8
9
0
