18
2200/ 3000VA 230V
Item Description
1
Data Line Connectors
2
Voltage Configuration Switch
3 USB
Port
4
RS232 (DB-9) Port
5-1
10A Output Circuit Breaker for 6-1
5-2
10A Output Circuit Breaker for 6-2
6-1
IEC-320-C13 Output Receptacles
6-2
IEC-320-C13 Output Receptacles
6-3
IEC-320-C19 Output Receptacles
7 Cooling
Vents
8
15A Input Circuit Breaker(2200 model only)
20A Input Circuit Breaker(3000 model only)
9
IEC-320-C20 Input Socket
10 REPO
11 Intellislot
Port
19
4
INSTALLATION
4.1
Connect Utility and Load
First, connect the UPS with utility power, then plug the loads into the
outlets on the rear of the UPS. To use the UPS as a master “On/Off”
switch, make sure that all of the loads are switched “on”.
These UPS outlets provide battery backup and surge protection to the
equipment when utility voltage is out of specification.
Caution---
Do not connect a laser printer to the UPS outlets!
