2
1
Introduction
The Network Pro UPS features a rack/tower convertible design, single
AVR boost and single buck, pure sine wave output, user-friendly LCD
display, built-in customer option slot, hot swappable battery, and
USB/RS232 communications interface. The Network Pro provides a
flexible rack/tower form factor for use with critical file servers, minicomputers,
network switches, hubs, and other business critical equipment.
Sine wave output provides clean output power to connected equipment.
User-friendly LCD panel displays system status including load level,
battery level, AVR-Boost/Buck and fault status for easy monitoring and
service.
90% high efficiency design when used in Normal mode meets high
efficiency energy saving standards and reduces noise and heat.
User-replaceable hot-swappable battery design saves time and money
by allowing quick battery changes without downtime.
Cold start function enables UPS to power up without connecting to
incoming utility power.
Optional Communication Software allows not only the control of the
UPS and graceful shutdown when the Utility Fails, but also allows the
user to remotely test the major operating functions of the UPS,
communicate via SNMP/web/network optional card, access UPS
functions via the web and alert users via SMS messages against
specific events.
User-friendly design can easily be installed by end user.
Plug-and-play USB/RS232 interface conveniently offers a USB or
RS232 port for connecting to a computer or other hardware.
3
2
IMPORTANT SAFETY INSTRUCTION
2.1
An Important Notice
1. The UPS has its own internal energy source (battery). If the UPS is
switched on when no AC power is available, there could be voltage at
the output receptacles.
2. Make sure that the AC Utility outlet is correctly grounded.
3. Do not open the case, as there are no serviceable parts inside. Your
warranty will be voided if the case is opened.
4. Do not try to repair the unit yourself; contact your local supplier or
Orion Power Systems Technical support if the unit needs repair.
5. Please make sure that the input voltage of the UPS matches the
supply voltage.
6. To eliminate any overheating of the UPS, keep all ventilation
openings free from obstruction.
7. Make sure the UPS is installed within the proper environment as
specified. (0-40
℃
and 30-90% non-condensing humidity)
8. Do not install the UPS in direct sunlight.
9. The UPS is designed for indoor installation only. Do not install the
UPS outdoors or in an environment that is not climate controlled.
10. Dusty, corrosive and salty environments can damage the UPS.
11. Install the UPS away from objects that give off excessive heat and
areas that are excessively wet.
12. If liquids are spilled onto the UPS or foreign objects are dropped into
the unit, the warranty will be void.
13. The battery will discharge if the system is disconnected from AC
power for long periods (>3 months). If left uncharged, the battery
may require replacement for the UPS to provide battery backup.
