Orion MPDP, User Manual

Page: 12 / 24

20
STAND UNIT
21
Infinitely Expandable
W
ALL UNIT
ID 1
ID 4
ID 7
ID 2
ID 5
ID 8
ID 3
ID 6
ID 9
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
RS-232C
IN
OUT
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
DVI-D
OUT
IN
Setting MPDP ID configuration and Connection (3X3) 5.
Configure MPDP ID and make connections for all the
necessary external devices and power.
Configure MPDP ID as shown in the following figure.
y
Make necessary connections such as speakers, VCR, DVD, PC and power, etc and finish
y
configuration.
Neatly arrange all the connection cables. If they are stretched out or disorganized, it may
y
cause personal injury or bad connection.
For more information for ID configuration and connection, please refer to
¹
MPDP user manual.
RS-232C control PC
DVI
DVI Signal Distributor
(UXGA : UP TO 250MHz)
WALL UNIT
This manual describes the installation for 3X3 sets.
¹
Apply following instruction according to the number of MPDP sets as you need.
55
21
40
40
486.7
486.7
40
40
370.6
50
190.35
65
WALL.BRACKET
MAIN.FRAME
벽
50mm