background image

Thank you very much for your purchase of the Orion pump. Read this instruction manual in advance to 
use this pump safely and to ensure continuing good performance.    The product mechanism and   
specifications are subject to change without notice.    If mechanism or specifications are changed,   
contents of this manual may not match the actual product. 
 

Safety Information 

Read "Precautions for Safety" before operation to ensure safe operation. Safety instructions in this 

manual are intended to ensure safe and correct pump operation and to prevent damage or personal 

injury. Safety instructions in this manual are classified into 

Danger, 

Warning, and 

 

Caution. 

 Danger 

Indicates an imminently hazardous situation that, if the product is 
misused, may bring about death or serious injury to the operator. 

 Warning 

Indicates a potentially hazardous situation that, if the product is 
misused, may bring about death or serious injury to the operator. 

 Caution 

Indicates a critical situation that, if the product is misused, may bring 
about injury to the operator or damage to the product. 

Additionally, the situation that is explained in 

Caution column may cause serious accident.    All 

safety information must be followed for safe operation. 

After reading this manual, keep it where an operator can refer to it anytime. 

When transferring or renting this product, attach this manual to the product where a new owner can 
easily refer to it for proper operation. 

 

Symbols 

 

The symbol 

  represents warning or caution. What is shown inside or described near informs 

of an actual hazard. The example on the left means caution for electric shock. 

 

The symbol 

  represents prohibition. What is shown inside or described near informs of an 

actual action which is prohibited. The example on the left means prohibition of disassembly. 

 

The symbol 

  represents essential action or instruction. What is shown inside or described 

near informs of an actual instruction about operation. The example on the left means disconnect 

the power plug from the outlet. 

 

 

The symbol        represents important information other than warning or caution. 

Although model KRF70 is used as description pictures and figures in the manual, the other models in the 
KRF-series are operated the same way as KRF70 if there is no note. 

 

Be sure to read through the   

safety information. 

Summary of Contents for KRF110





































Reviews: