Orion CVD605 Book Instrucctions Download Page 46

Page: 46 / 64

A B

Play Mode

Off

Repeat

Off

/Enter/Play Mode

:
:

Track

Play Mode

Off

Repeat

:
:

/Enter/Play Mode

Repeat

Play Mode

Off
All

:
:

/Enter/Play Mode

Repeat

/Enter/Play Mode

Off

Chapter

Repeat

/Enter/Play Mode

Repeat

Title

/Enter/Play Mode

Repeat playback

Notes:

• Some discs may not be compatible

with the repeat operation.

• In A-B Repeat mode, subtitles near the

A or B locations may not be displayed.

• You cannot set the A-B Repeat for the

scenes that include multiple angles.

• You may not be able to set A-B Repeat,

during certain on the scenes of the
DVD.

• A-B Repeat does not work with an in-

teractive DVD, MP3/MPEG/WMA/
JPEG-CD and Video-CD with PBC.

Press

to select “Repeat”.

Press

ENTER

once or twice to select “Track” or “All”.

Press

PLAY MODE

again to exit the On Screen Display.

Press

(PLAY)

to start Repeat playback.

To resume normal playback, select Repeat “Off”.

A-B Repeat playback

A-B repeat playback allows you to repeat material between two
selected points.

Press

REPEAT A-B

during

playback.
The start point is selected.

Press

REPEAT A-B

again.

The end point is selected.
Playback starts at the point
that you selected. Playback
stops at the end point, and
resumes again at point A.

To resume normal playback press

REPEAT A-B

again.

“

Off

” appears on the screen.

Preparation:

• Turn ON the TV and set to the video input mode.
• Press

DVD

to select the DVD mode. (The DVD indicator will light.)

Title, Chapter and Track Repeat playback

Press

PLAY

MODE

during playback or stop mode.

DVD

Press

ENTER

once or twice to select “Chapter” or “Title”.

2C98710A[E](44-53)

20/1/04, 3:19

Summary of Contents for CVD605

































































Search results

Summary of Contents for CVD605

Reviews:

Related manuals for CVD605

Brands by name

Popular brands

Orion CVD605, Book Instrucctions

Search results

Summary of Contents for CVD605

Reviews:

Related manuals for CVD605

Brands by name

Popular brands