16
3
Automatic TV station presetting
2
1
4
Your DVD/VCR has one built-in tuner
to receive the broadcast. Before you
record one TV-Broadcast, you must
set and preset the whole of the broad-
casts. This DVD/VCR can preset up
to 80 broadcast.
Automatic station presetting
All stations will preset in sequence available in your area.
Preparation:
• Turn ON the TV and set to the video input mode.
• Press
VCR
to select the VCR mode. (The VCR indicator will light.)
Press
MENU
.
Press
or
to select
CHANNEL SETUP. Then
press
ENTER
.
Press
or
to select AUTO
TUNING.
Press
ENTER
.
The DVD/VCR will begin searching and setting with early stored
channel, the number is increased by one into memory all the broad-
casting channels available in you area (VHF-L, VHF-H, UHF). While
setting channels, AUTO TUNING appears. When the setting
finished, the CHANNEL MAPPING menu will appear.
Press
MENU
repeatedly until the TV picture appears on the
screen.
Note:
To cancel skipping select the skipped channel using
10
number buttons
, then press
CANCEL
. The channel No. dose not
blink any longer, and the channel No. now may be selected again
using
(CHANNEL) +/–
.
To skip a channel position
Unwanted channels can be skipped so that they cannot be called up
by pressing
(CHANNEL)
+/–
. Select the 29, then press
CANCEL
.
This channel’s number will be flashing. That way you can cancel
further channel one after the other.
Notes:
• TV reception interference or power fail-
ure may result in Automatic station pre-
setting malfunctions. In such a case
repeat the setting procedure from the
beginning.
However, you cannot receive the nec-
essary broadcast yet, try to preset the
broadcast manually. (See page 20.)
• When the unit is in the auxiliary input
mode, you cannot preset channels.
2C98710A[E](16-21)
20/1/04, 3:17
16
