12
WIRELESS AUTODIAL
HOME ALARM SYSTEM
AM2000
PROFESSIONAL
SECURITY SYSTEM
4
WIRELESS MOTION SENSOR
110˚/8m
GROUND
TOP VIEW
SIDE VIEW
DETECTION
WINDOW
LED INDICATOR
OUTER
ENCLOSURE
REAR VIEW
FRONT VIEW
BRACKET
TEST
BUTTON
1.
Fix the mounting bracket on the wall
with screws and attach the sensor
to the bracket.
2.
Adjust installation height or bracket to
change the detection distance and angle.
It is recommended to mount the sensor at
the height of 2m from the ground.
NOTE
– the sensor is more sensitive
to movement across the sensor rather than
towards it, so the sensor functions best when it
is positioned to one side of a walkway.
SENSOR
– detects the motion of infra-red rays
released by human body and animals, or heat
sources. Do not touch the sensor and always
keep the detection window clean.
TAMPER SWITCH
– when the case is opened
during armed state, the tamper switch will be
triggered and generate a signal to alarm the
AM2000 control panel.
LED ON/OFF
– set the jumper to ON or OFF
position to activate or deactivate LED indication.
ZONE SETTING
– set the jumpers to different
zone mode for different alarm activation
method.
4.1
INSTALLATION AND NOTICES
4.3
INTERNAL AND FUNCTIONS
NOTE
– if two sensors are installed in the
same detection range, please adjust the
location and height of each unit to avoid
interference and false triggering.
4.2
DETECTION RANGE
TOP VIEW
SIDE VIEW