background image

6

WARNING

To prevent fire, never place any type of candle or open flame 

on the top or near the TV set.

Moving the unit or carrying by hand

When the unit is moved a long way, unplug the power cord and disconnect the antenna, connecting 

cables and any fall-prevention apparatus.

•  Moving without doing so could result in damage to the power cord, a fire, electric shocks or injuries from 

dropping the unit.

Ensure that unpacking and transfer of the unit is carried out by two or more people and that the unit 

stays upright when doing this.
When the TV stand has casters, remove caster cups from the stand and push it while supporting the 

unit.

•  Ensure that you support the unit when the stand is pushed, as this can cause the unit to fall and you could 

be injured.

•  The appliance could leave indentations in wooden tables with extremely soft wooden surfaces due to its 

heavy weight.

•  Furniture polish could corrode and dissolve rubber feet. Black imprints could be visible on the table. You 

should therefore only use TV benches, which have been constructed for this specific purpose.

Secure the casters when the unit is installed on a TV stand with casters.

•  The stand can move and you could be hurt if the casters are not secured.

  Remove casters when the stand is placed on a soft surface such as a mat and carpet.

The distance between eyes and the screen should be about 3 ~ 4 times as long as height of the screen.

•  Viewing from too close a distance can cause strain for your eyes.

When installing the Monitor on a table, be careful not to place the edge of its stand.

•  This may cause the Monitor to fall, causing serious injury to a child or adult, and serious damage to the 

Monitor.

Possible Adverse Effects on LCD Screen:

 If a fixed (non-moving) pattern remains on the LCD screen for long 

periods of time, the image can become permanently engrained in the LCD TV panel and cause subtle but perma-

nent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for 

long periods of time while it is displaying the following formats or images:

•  Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.

•  Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal 

(4:3) display (Black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen 

(16:9) display (Black bars on left and right sides of screen).

Attention!

Cleaning instructions for your LCD TV.

Safety note:

Before you start to clean, switch the set’s power off completely and disconnect the plug from the mains power supply.
Be careful not to scratch the plastic coated front panel - it is highly vulnerable to accidental scratching (e.g. by 

fingernails or other sharp items). (While cleaning, do not wear jewelry) that could cause surface scratching (such 

as rings, wrist-watch, etc.). Use a lint-free cloth and pure water to clean with, but make sure the cloth is thoroughly 

wrung out so that it is just damp and not soaking wet - also make sure that the cloth is free from any dirt that could 

cause scratching to the surface.

Wipe the set clean using minimal pressure.

Do not use standard window cleaning fluid. Its alcohol / ammonia will dissolve the front window’s coating.

Never use solvent or thinner. Never use special cleaners which are designed for cleaning PC Monitors or CRT TVs. 

Finally carefully rub dry with a clean dry lint-free cloth.

Do not use paper towels or tissues to clean the set - paper can disintegrate when wet or may leave a trail of dust 

behind. Some paper can also be abrasive and scratch your screen.

Important safety information

3BR2901A_EN.indd   6

3BR2901A_EN.indd   6

3/8/11   12:13:59 PM

3/8/11   12:13:59 PM

Summary of Contents for 26MT6000





























Reviews: