27
Troubleshooting table
Please check the following list before requesting service.
Symptom
Possible solution
Page
No picture, no sound
Switch on the set.
Check that the mains power outlet is properly connected.
Select appropriate input mode.
Unplug unit for 1 minute, then plug it back in.
7
12
No reception
Have you tuned in the TV stations?
Press
1
on the remote control.
Connect the antenna.
Make sure the set is ON and not in Standby mode
10
11
The TV switches off with
missing antenna input signal
This is normal.
15 minutes after the antenna signal has disappeared, the set will
change to standby mode.
13
In menu, the Channel
option cannot be selected.
The unit is set to AV mode. Press
1
on the remote control.
12
Wrong Colours
Colour and Brightness errors can occur when the viewing angle/
ambient air temperature (see technical specifications) are exceeded.
While viewing a DVB (digital)
channel, there is sound but no
picture.
Some channel offers audio content only. It is normal.
Blocky image or image stops
intermittently.
Check all antenna connections.
Move the antenna away from areas of possible interference.
Try using an antenna booster.
10
Some digital channels cannot
be viewed.
Contact the service provider to subscribe.
No colour or picture black.
AV input set to AUTO.
20
The LCD panel is a very high technology product, giving you fine picture details. Occasionally, a few nonactive pixels
may appear on the screen as a fixed point of blue, green or red. Please note that this does not affect the performance
of your product.
•
26MT6000
32MT6000
System
Analogue: PAL UK, IR, CCIR, FRENCH System, B/G, D/K, I/I, L
Digital:
DVB-T (OFDM 2k/8k 16QAM/64QAM), DVB-T HD (H.264)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
Preset channels
Analog: 102 Carrier, Digital: 69 Carrier (2000 Service)
Frequency Range
Analogue: IreE2~E4, X~Z+2, S1~S10, E5~E12, S11~S41, E21~E69
Digital:
E5~E12, ItaD~H2, Fra1~6, Rus6~12, E21~E69
Power Supply
AC 220-240V, 50Hz
Power Consumption Operation: 55W at AC230V, 50Hz
68W at AC230V, 50Hz
(approx.)
Standby: 0.4W at AC230V, 50Hz
LCD
66 cm visible
80 cm visible
TFT low-glass Active Matrix Colour LCD, 1920 x 1080 Pixel
HDMI input
HDMI compliant (type A connector), HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i/1080p
NTSC:
480i/480p/720p/1080i/1080p
HDMI Audio: 2-channel PCM, 32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
Output Power
approx. 10W (MAX) x 2
Surrounding temperature
Operation: 5°C ~ 40°C/Storage: –20°C ~ 60°C
Operating Humidity
Less than 80%RH
Dimensions (W) x (H) x (D)
66 x 48 x 18 cm
79 x 55 x 18 cm
Weight (w/o Accessories)
approx. 7.0 kg
approx. 8.4 kg
Accessories
2 batteries (AAA/R3/UM-4)/Remote control unit/AC cord/Stand/3 Screws for stand
Weight and dimensions are approximate. Because we continually strive to improve our products we may change
specifications and designs without prior notice.
Specifications
3BR2901A_EN.indd 27
3BR2901A_EN.indd 27
3/8/11 12:14:33 PM
3/8/11 12:14:33 PM
