Temperature Event
Select
Temperature Event
and configure the event
settings. With system event enabled, user can
denigrate the area where user would like to check the
min. & max. temperature from the screen as below.
•
Temperature value for detection
-
Select temperature value starts to be detected for
event (alarm) out.
•
Percent value for detection
- Select percent of temperature value to be
detected for event (alarm) out.
-
After push the button named temperature event,
you can see the pop up screen as below.
-
Then please click button and select the square
area like as above, and then push OK button.
-
After that, user can see min. & max. temperature
from the screen as above.
29
Summary of Contents for IC110HF011PT13
Page 1: ...Network Camera Operation Manual...
Page 37: ...Part 3 Specification 36...
