ORiNG RGS-9244GP User Manual Download Page 93

Page: 93 / 171

RGS-9244GP Series User Manual

ORing Industrial Networking Corp.

Parameters

Valid Drop Precedence Level value can be (0-1) or

Default

Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or

Default

Default means that the default classified value is not modified by this QCE.

5.6.14 QoS Counters

This page provides the statistics of individual queues for all switch ports.

Label

Description

Port

The switch port number to which the following settings will be applied.

There are 8 QoS queues per port. Q0 is the lowest priority

Rx / Tx

The number of received and transmitted packets per queue

5.6.15 QCL Status

This page shows the QCL status by different QCL users. Each row describes the QCE that is

defined. It is a conflict if a specific QCE is not applied to the hardware due to hardware

limitations. The maximum number of QCEs is 256 on each switch.

Summary of Contents for RGS-9244GP












































































































































































Search results

Summary of Contents for RGS-9244GP

Reviews:

Related manuals for RGS-9244GP

Brands by name

Popular brands

ORiNG RGS-9244GP, User Manual

Search results

Summary of Contents for RGS-9244GP

Reviews:

Related manuals for RGS-9244GP

Brands by name

Popular brands